Online / 06. September 2021 - 10. September 2021
38th European Photovoltaic Solar Energy Conference and Exhibition PVSEC
Die EU PVSEC ist die größte internationale Fachkonferenz für Photovoltaik in den Bereichen Forschung, Technologien und Anwendungen in der Vertreter der Photovoltaik-Industrie ihre Technologien, Innovationen und neuen Konzepte präsentieren. In diesem Jahr findet die EU PVSEC erneut online statt. Dr. Volker Sittinger, Leiter der Abteilung Diamantbasierte Systeme und Anwendungen des Fraunhofer IST, und Hunter King sind mit einem Vortrag sowie einem Poster an der Konferenz beteiligt.
Montag, 6. September 2021 (Session 3AO.4)
J.C. Goldschmidt, P.S.C. Schulze, O.S. Kabakli, A.J. Bett, M. Bivour, R. Efinger, F. Feldmann, F.M. Gerspacher, B.S. Goraya, M. Heydarian, C. Luderer, C. Messmer, H. Nagel, S. NOld, M. Penn, C. Reichel, M.C. Schubert, C.A. Romero Sierra, L. Tutsch, M. Hermle, S.W. Glunz (Fraunhofer ISE); B. Fett, B. Herbig (Fraunhofer ISC), H. King, V. Sittinger (Fraunhofer IST), S. Lange, V. Nauann (Fraunhofer CSP)
Dienstag, 7. September 2021 (Session 3BV.2)
10:30 - 12:00 Uhr
H. King, V. Sittinger, T. Harig (Fraunhofer IST), O.S. Kabakli, P.S.C. Schulze, J.C. Goldschmidt (Fraunhofer ISE)
Using sputtering processes Indium Tin Oxide and Indium Zinc Oxide films were developed for use in Perovskite-Silicon tandem solar cells as a TCO top-layer. Perovskite absorber materials have shown significant promise in the last 10 years for use alone or in tandem cell configurations. However, due to increased temperature instability when compared with their silicon counterparts, new processes and materials must be developed for the surrounding contact layers in order to maximize both cell performance and lifetime. For this purpose, ITO and IZO films with the temperature limitations of the perovskite absorber in mind (Tmax < 100 °C). The optimum process parameters are determined by optical and conductivity measurements, in addition to contact resistivity measurements between the TCO layer and the neighboring buffer layers.
2. EXPERIMENTAL DETAILS
ITO films were produced using a DC sputter process utilizing a 95/5 [In/Sn wt. %] ceramic target, while the IZO films were produced by means of a reactive co-sputtering process. In the case of the IZO the Zinc concentration was varied by means of a variation in sputter power in the planar cathode towards the Indium rotatable target. Film stoichiometries were confirmed by means of EPMA measurements, optical measurements consisted of photometry and ellipsometric measurements, and electrical measurements consisted of 4-point conductivity and Hall effect measurements in order to confirm the carrier concentration and mobility of the films.
3. RESULTS AND OUTLOOK
TCO films were optimized for perovskite-silicon tandem cell applications. The ITO films were optimized as a function of additional mixed gas [Argon/Oxygen 90/10 %] and additional hydrogen gas. An optimum between film absorption and conductivity was found, while maintaining deposition temperatures below 100 °C. The IZO films were optimized as a function of additional oxygen flow rate by maintaining operation in the sputtering transition zone between metallic and oxide operation. In this range the films were optimized to minimize film absorption and maximize conductivity.
These optimized TCO films will be implemented into newly developed perovskite-silicon tandem solar cells which utilize new state of the art material combinations, as produced from partner institutes within the Fraunhofer Society.
This work was supported as a Fraunhofer LIGHTHOUSE PROJECT.