Thin-film sensors for deep-hole drilling tools

Layer sensing – Thin-film sensor systems for guide pads to measure forces, temperatures, and wear in machining processes

The photo shows a spacer plate with thin-film sensors used to measure force beneath the guide rail during deep drilling.
© Fraunhofer IST
Spacer plates with thin-film sensors for measuring force beneath the guide rail during deep drilling.
Horizontale Grafik der Sustainable Development Goals: links das SDG-Logo, daneben Ziel 9 „Industry, Innovation and Infrastructure“ (orange, Würfel-Symbol) und Ziel 12 „Responsible Consumption and Production“ (braun, Kreislauf-Pfeil).

Challenge

During machining, high forces and temperatures act on the contact zone between the tool and the workpiece. These factors influence the surface quality and the properties of the component’s edge zone. A key challenge is to further develop thin-film sensor technology so that it can permanently withstand the high mechanical and thermal stresses in the machining zone and deliver reliable measurement data.

Solution

The goal of this trilateral project is to use thin-film sensor technology developed at Fraunhofer IST to measure and utilize forces and temperatures in the contact zone between the guide pad and the bore wall, as well as the wear condition of the guide pad, using BTA deep drilling and single-lip deep drilling as examples. To this end, the thin-film sensor system will be specifically adapted to the requirements of the machining process. In addition, a suitable data transmission system will be developed to enable the transfer of measurement data from the guide pad through the tool to the machine control system. The goal is to produce a prototype of a sensor-based tool system by the end of the project.

Added Value

The direct sensory measurement of forces, temperatures, and wear conditions lays the foundation for continuous process and tool monitoring. As a passive monitoring system, it enables the early detection of critical process conditions and potential defects, thereby ensuring the quality of the manufactured components in a targeted manner. Furthermore, the acquired measurement data opens up the potential for active process control. With the help of suitable evaluation methods, such as machine learning approaches, machining processes can be adjusted and optimized in the future.

Our focus and expertise

 

Expertise

Micro and sensor technology

Focus on tribosensor technology

 

Expertise

Microstructuring

 

Smart surfaces for innovative products and processes

Tribology and corrosion